How do I identify my cabinet maker?
Cabinet brands that belong to the Kitchen Cabinet Manufacturers Association (KCMA) will have a sticker on the back side of the sink door or side wall of the cabinet. On the sticker there should be a code or the cabinetry name in the middle of the label.
What are the three basic types of cabinet construction?
There are three types of cabinets: partial overlay, full overlay, and inset. Each term is used to describe how the cabinet door or drawer sits on or in the cabinet frame. The three types of cabinets also represent different budgets and styles.
How do I know if my cabinets are good quality?
To shop smart and avoid problems down the road, look for the following characteristics of well-built, high-quality cabinets.
- All-plywood construction.
- Full-height back panels.
- Soft-close hinges.
- Undermount, soft-close drawer glides.
- Hardwood dovetail drawer boxes.
- Fully assembled in the factory.
- Face frames.
What is cabinet construction?
Cabinet construction Cabinets are basically six-sided boxes, closed in on five sides. Two main methods have been used over the years to build the cabinet box, or carcase. They are referred to as face frame and frameless construction.
What are the codes for kitchen cabinets?
Base Kitchen Cabinet Codes For base cabinets there is a similar format, but the height and depth are always the standard of 34.5″ tall, and a depth of 24″. So the basic code for a base cabinet would be B15, which is a 15″ wide base cabinet. For a sink base cabinet is would be SB30 (30″ wide sink base).
How can I tell if my cabinets are laminate or veneer?
A sure way to recognize wood laminate is when the grain does NOT follow through your piece. Wood Veneer is a sheet or thin layer of ‘quality-natural-hardwood’ that is adhered to a lesser quality wood surface.
What are the two methods of cabinet construction?
There are two main types of cabinet construction offered to US consumers today: framed and frameless (Euro style). Each has structural and stylistic advantages and disadvantages. Other construction options include ready-to-assemble (RTA) cabinets and refacing cabinets with new fronts only.
Are partial overlay cabinets out of style?
Avoid: Raised panel doors and partial-overlay In fact, they are the style most homeowners who are upgrading are replacing right now. Partial overlay, which do not completely cover the frame visible in a cabinetry run, is also on its way out.
How much do high-end cabinets cost?
How Much Do High-End Kitchen Cabinets Cost? High-end cabinetry typically costs between $500-$1,500 per linear foot. This can add up to roughly $12,500 – $18,500, depending on the size of the kitchen.
What do you call someone who installs cabinets?
Cabinet makers are types of woodworkers. On a construction project, a woodworker would make the cabinets, but a carpenter would install them.
Are framed or frameless cabinets better?
Framed cabinets are also more flexible since they have more design possibilities for creating a customized look. Frameless cabinets are typically called “full access” because they allow more accessibility by eliminating not only the frame but the center stiles between two cabinet doors as well.
Is vent hood required by code?
Is a range hood required by code in California? In California, vent hoods are required that produce 100 cfm or more intermittently or produce 5 air exchanges in one hour. This is required in all residential areas, remodeled homes, or areas that are 1000 square feet or larger.
How much space do you need on each side of a stove?
Allow at least 15 to 18 inches of counter space on one side of the oven. Allow counter space on both sides of the stove or stovetop – 12 to 18 inches on one side and 15 to 24 on the other. Allow 18 to 30 inches of counter top on one side of the sink and 24 to 36 on the other.
How do you tell if your cabinets are laminate?
Check the edges of the doors and drawers. If they are solid wood, you’ll see end grain on the tops and bottoms. If they’re laminated, you’ll see edging material with a longitudinal wood grain, which looks unnatural.
Can you paint fake wood cabinets?
It is possible to paint over fake wood surfaces of this type, but the work must be carefully done to get good adhesion of the paint. Because most of your work must be done in a kitchen, where flames or sparks are a problem, I suggest using all latex-based products to avoid flammability dangers.
What are the basic methods of cabinet construction?
Top 4 Kitchen Cabinet Construction Methods
- Butt joints & Wood screws. Building cabinets with a butt joint and wood screws drilled into the sides will be the fastest way to build the carcass and needs no special tools.
- Butt joints & pocket hole screws.
- Dados.
- Dowel & Dovetail Joints.
What is the difference between standard overlay and full overlay cabinets?
The doors and drawers on a full overlay cabinet cover the face frame almost completely with a ¼ inch of space between the doors and drawers. This differs from a standard overlay which has at least 1 ¼ inches on all sides of the doors and drawers.
Can I replace partial overlay cabinet doors with full overlay?
Partial overlay cabinet doors are one of the most commonly found cabinet styles. To change your kitchen from partial to full overlay cabinet doors, there is no need to replace the cabinetry; just reface the cabinets with new, custom doors.
